![Ugreen Bluetooth 5.0 audio receiver aptX HD DAC SBC 3.5mm mini headphone jack sound card black (CM402 80895) - TopMag](http://topmag.bg/cdn/shop/products/71785_1_{width}x.jpg?v=1668306793)
Bluetooth 5.0 aptX HD DAC SBC Ugreen audio receiver with 3.5mm mini jack for headphones - black (CM402 80895)
Turn your wired headphones into wireless ! The Ugreen sound receiver, which wirelessly connects to smartphones or laptops , has been equipped with a 3.5 mm mini jack connector. So it will send the sound to headphones or speakers, thanks to which you will gain freedom and convenience . Almost no delays! The receiver supports as many as four audio transmission protocols - so you can be sure that the music quality will be at the highest level .
Specification:
- Brand: Ugreen
- Model: CM402
- Port: 3.5mm mini jack
- Battery charging connector type: USB Type C
- Bluetooth version: 5.0
- Audio transfer protocols: SBC, AAC, aptX, aptX HD
- Impedance: 16-600 ohms
- Frequency response: 20Hz - 20KHz
- Volume: up to 120 dB
- Range: up to 10 m
- Battery capacity: 400 mAh
- Music playing time: 10 hours
- Charging time: 2 hours
- Material: ABS + PC
- The set includes: USB - USB Type C cable with a length of 0.5 m
- Dimensions: 53 x 24 x 13.5 mm
- Weight: 24.4 g
- Black colour
The most important advantages of the Ugreen CM402 sound receiver:
- You can wirelessly connect wired devices , e.g. headphones with phones, laptops or tablets with speakers - also those that do not have a 3.5 mm mini jack connector
- Enjoy video game audio or streaming music with almost no lag . Bluetooth 5.0 module and built-in chips ensure lossless sound transmission without interference
- Listen to music on the headphones without blocking the charging of your phone . Wireless connection gives access to a charging socket, eg Lightning on iPhones
- Use your receiver for hours . A long-lasting battery allows you to listen to music for up to 10 hours
- High-quality music at your fingertips - four Bluetooth codecs, including aptX HD and chips, including the DAC CS43131, ensure clarity of sound
Converts wired headphones to wireless
The Ugreen sound receiver allows you to perfectly synchronize laptops, smartphones, tablets with multiple speakers and headphones , and thanks to the built-in microphone, it also has the function of a headset . It is a multifunctional device that will help you in many life situations:
- allows you to listen to high-quality music on headphones while traveling - without cables tangled in your pocket.
- will allow you to wirelessly answer the phone while driving - when your car does not have Bluetooth connectivity, but has a 3.5mm mini jack input.
- it will enable simultaneous charging of the phone and listening to music on headphones - especially in those smartphones in which one port shares both these functions, e.g. Lightning in iPhones.
Quality you will hear
The audio receiver allows you to stream music in really high quality . It supports four Bluetooth codecs, including aptX HD Qualcomm and aptX LL . So it synchronizes the sound with the picture with almost no delay. The manufacturer declares that the shift will be up to 40 ms - this difference is practically imperceptible to the eye and ear. Ugreen also made sure that the sound was reliably clear - no matter what kind of headphones you have. The amplifier supports impedance from 16 to 600 ohms . So it adapts to many models of headphones.
Battery for a long time
Don't worry about draining your battery quickly though. The device has two chips with extremely low power consumption : DAC CS43131 (with SNR at the level of 120 dB) and Qualcomm QCC3034 for the Bluetooth 5.0 module. They are designed specifically for stereo headsets . So you can listen to your beloved music out loud for up to 10 hours without draining your battery! Interestingly, charging the receiver will take only 2 hours .
No 3.5mm mini jack connector? No problem!
Want to connect a speaker or headphones to a laptop that doesn't have a 3.5mm mini jack? The Ugreen receiver comes to the rescue - it can change into an external, independent sound card at any time . The USB Type C connector supports audio transmission in computers with Windows 7, 8 and 10, macOS and Linux .
NFC quick pairing
If your phone has the NFT function, the Ugreen receiver will connect to it in a few seconds. Thanks to the built-in NFT function, you can pair your device with one click . Importantly, the receiver can connect to two devices at the same time and freely switch between them.
Support for four audio protocols
To ensure the highest possible sound quality, the Ugreen receiver has been equipped with four Bluetooth codecs . Thanks to the smart chip, the device will let you know what audio transmission protocol has been detected. Pay attention to the LED light:
- blue light - SBC protocol
- green light - AAC protocol
- yellow light - aptX protocol
- purple light - aptX HD protocol
Three buttons, many functions
Phone calls, listening to music, switching between songs ... All the possible functions provided by the CM402 receiver can be operated with just three buttons . Those are:
- play / pause - turns on and stops sound transmission (short press), turns the device on and off (press for 3 seconds), answers and ends a phone call (short press), rejects the call (press for 3 seconds)
- volume (+) - volume up (short press), previous track (long press)
- volume (-) - volume down (short press), next track (long press)
Support for CTIA and OMTP plugins
The CM402 receiver is compatible with two standards of 3.5 mm mini jack plugs: CTIA and OMTP . So you won't have any compatibility issues between hardware. The difference between the older OMTP cable and the newer CTIA is a minor difference: the ground and microphone pins have been swapped, which can cause audio recording problems if you use incompatible standards. The Ugreen adapter completely solves this problem!